How to clean panels and remove stains?

Written by hana

Whether wooden or tiled, these strips can get dirty quickly. Here are the easiest ways to clean it well.

How to prepare the base for cleaning?

Before you clean the panels completely, you must first Excess dust removal. For this, pass by Vacuum cleaner, feather duster or broom. For hard-to-reach corners, use a wet piece of cotton To remove dust and dirt. This way, they will be ready for a thorough cleaning. Roll up your sleeves and get started!

board cleaning

Clean the panels. Source: spm

How to deep clean the panels? Two simple and effective tips!

Clean whiteboards can give your home The perfect finish After a thorough cleaning. But if you avoid them all the time because they look hard to clean, or they usually involve standing bent over for long periods of time, there are some very simple ways to make them easy to maintain. Here’s what to do.

  • Clean tile panels with white vinegar

This is one of the most practical tips for removing dust and dirt deposits from panels.

what do you need :

  • broom
  • Tissue paper
  • White vinegar
  • spray bottle

Fill a spray bottle with a mixture of white vinegar and water (50/50 ratio).

Wrap the broom with 2 or 3 paper towels and secure them with an elastic band on each side.

Spray the panels with a vinegar cleaning solution.

Wipe the panels to remove any dirt that has accumulated there.

Replace the paper towel once it is dirty.

White vinegar is an excellent natural cleaner that helps unclog all traces of dirt thanks to its antimicrobial properties and high acetic acid content.

However, avoid using vinegar on marble or natural stone, as the acidity of the product will damage these surfaces. In this case, it is recommended to use Marseille soap.

Clean the boards with white vinegar

Clean the panels with white vinegar. Source: spm

  • Cleaning stained wood panels

stained wood panels Advance Very attractive aesthetic appearanceBut when it gets dirty, cleaning it becomes very tedious. However, there is a trick to doing this in no time.

what do you need :

  • 3 liters of hot water
  • 4 tablespoons or (1/4 cup) liquid dish detergent or household soap.
  • 1 tablespoon vegetable oil

Use a sponge or microfiber cloth to wipe the panels with the cleaning solution (if the stains are stubborn, feel free to scrub with the sponge with light pressure). Squeeze the sponge vigorously to avoid too much water from getting into the wood. Once the panels are clean, use a rag dampened with clear water to give them a final wipe and remove any soapy residue. The remaining oil will give the wood a sheen and luster.

Wood panels cleaning

Clean wood panels. Source: spm

Other ways to clean panels

There are other economical ways to clean panels. Here are a few.

  • Baby wipes to remove dirt from plates

If you need to clean the panels urgently, then disposable wet wipes are one of the best solutions. Although it is not very environmental (because you have to throw it away after every use), it can be very useful for you in times of need.

  • Magic eraser sponge to remove dirt stains from panels

Thanks to Its stain removal propertiesAnd the sponge eraser Effectively removes all traces of dirt from the surface of the panels. To do this, simply dip it hot water and soap. Squeeze, rub gently, and pat dry with a clean, lint-free towel.

Remove dirt from panels

Remove dirt from panels. Source: spm

If you tend to neglect board cleaning, now with these tips you can do it in just a few minutes while using the products you already have at home.

About the author


Leave a Comment