Heating in France accounts for nearly 60% of a household’s energy bill. However, more and more families are finding that the performance of their chiller falls short of their expectations. This is largely due to improper use of this device.
What mistakes should be avoided when using the coolant?
For efficient heating, it is advisable to avoid some errors when using the coolant which can greatly affect its performance. These are some examples.
Close the blinds and blinds when using the heater
In winter, it is tempting to keep blinds and blinds closed to maintain the optimum temperature inside the house. This is a good wrong idea. By doing this, you are preventing the sun’s rays from heating up your home. If the windows do not close enough air leakage, it would be wise to replace them.
Do not open windows with the heater on
Ventilation of the house is necessary to remove various pollutants from the indoor air (moisture, mold, dust mites, unpleasant odors). So, even if it’s really cold outside, consider airing your home for 10 minutes a day. During this short time, the walls will not have time to cool down and will be able to maintain their temperature. Thanks to this air renewal, the dry climate in your home will need only a little energy to heat it up.
Set the heater to the maximum temperature
Lowering the coolant temperature when you leave the house can be helpful to save money at the end of the month. However, there is no doubt about adjusting it to the maximum, once you get home. This gesture, seemingly harmless at first glance, can lead to excessive consumption of energy without heating, slash more quickly. The best thing is to invest in a programmable thermostat that allows you to adjust the temperature of your home.
In order for the heat to be distributed evenly inside the house, the radiator must be thoroughly cleaned. To do this, avoid cluttering the radiator space with furniture or something else similar. In addition, it is highly recommended not to dry the laundry on it.. In this case, it is quite possible to put the linen on a drying rack near the heating. The location of the device is also important. If it is placed near a cold or poorly insulated wall, the latter will not be effective and will not distribute heat evenly. Remember to insulate the ceiling and walls of the rooms to avoid heat loss. Finally, it is recommended to dust the radiator regularly to maintain its performance and efficiency.
Heating the rooms of the house to the same temperature
The most common and approved reflex is to set all the radiators in the house to the same temperature. However, know that it is best to set the temperature according to each room. For living rooms, the ideal temperature will be between 18 and 20 degrees Celsius. The bedrooms can be set at 16°C-18°C and the bathroom at 22°C.
Forget about maintaining and emptying your coolant
Maintenance of the cooler is essential in order for it to be as efficient as possible while consuming as little energy as possible. Remember to clean the appliance, at least once a year, in order to ensure it is working properly. It is also recommended to carry out this operation prophylactically before starting it.