recipes

Water leaking in the toilet? It costs you a lot of money. Here’s how to fix easily

Written by hana

If your toilet is constantly leaking, don’t panic! So here’s what to do when facing this kind of problem.

What do you do if your toilet is constantly flushing?

A leaky toilet is a situation that may seem trivial or even without any serious consequences. You tell yourself that there is no emergency, it is just a temporary dysfunction. Far from it, if taken seriously, this kind of problem can get worse over time and even get worse, It affects your water consumption and therefore your bill who would be anything but the light. Fortunately, in most cases, this problem does not require the imminent intervention of a plumber. All you need is a little patience, a few technical gestures, a natural limescale remover and a little elbow grease.

  1. Check the toilet float

A necessary element for the proper operation of any flow, It may end up floating in the wrong position. In other words, too high or too low. This malfunction may be caused by water leaks and constant noises that resonate every time the tank is filled. To remedy this, simply bend the metal rod that attaches the float to the valve or correct its position by tightening or loosening the adjusting screw. Moreover, if you notice that the float is perforated, you will have to replace it.

toilet repair

Toilet flush repair – Source: spm

  1. Check the float valve on the toilet flush

Sometimes, a lack of maintenance can be the cause of a leaky toilet. A simple visual inspection in this case can indicate the presence of limescale on the valve. When the valve is scaled, it can no longer hold water, causing it to leak. In such a case, just clean it By taking a bath with white vinegar to dissolve limestone. In case of visible wear, it is recommended to replace it to ensure the proper functioning of the rinse.

  1. Check the flow seal

The seal is worn out and there is water seeping in and out of the bowl. In this case, you will simply have to replace it. First, close the supply tap and flush the toilet to empty the tank as much as possible. Then, using an adjustable wrench, disconnect the water supply from the toilet tank and open the flush tank by loosening the wing nuts on the outside. By raising the tank, you will be able to see the gasket you are going to remove. So it suffices to Replace it with one of the same model. Once the process is completed, all you have to do is put all the parts back in place and put them back together, turn on the water supply and then test the proper functioning of the wash.

open tank

Opening the tank – Source: spm

  1. Make sure the flush tank is not damaged

Sometimes, the problem may not be in the flow itself, but in the tank.

When using it on a daily basis and having to deal with sudden and brutal changes in temperature, some cracks may appear in the rinse tank. These cracks are usually visible internally or externally. In this kind of situation, it is recommended to change the tank due to A clogged crack will not be able to prevent the flow from leaking again.

Our toilets, called all day long, are subject to all kinds of daily assaults that can eventually cause water leaks at the cleaning level in particular. It is therefore advisable to solve the problem once and for all, to prevent the water bill from becoming salty at the end of the month.

About the author

hana

Leave a Comment