recipes

Effortlessly get rid of black joints in bathroom or kitchen tiles: an effective method

Written by hana

It is not only important not to neglect the maintenance of tiling joints for the issue of hygiene but also Avoid cracks. This can enhance water penetration, causing the tiles to come off and this is the last thing you want to see on a tiled floor or wall. To effectively maintain tile joints, here is a simple but relatively effective technique.

tile joints

Tile joints – Source: spm

How to maintain tile joints effortlessly?

It only takes a few days for the joints of wall or floor tiles to turn black after washing. A problem that requires being smart by having more than one trick up your sleeve. How ? By adopting this method you make it possible to whiten tile joints.

To achieve this, you can count on a product that is not uncommon to find at home: white candle. Indeed, the wax of the latter will allow to create effective protection on the joints separating the tiles. To get started, clean the joints as usual, freeing them of dust and letting them dry. Then take the white candle and rub its tip over the gaskets, making sure to remove the wick from the candle. Thus a protective film will be created that will allow the joints to be whitened while delaying the excessive formation of dirt.

white candle

White candle – Source: spm

If your bathroom tiles are full of scale and soapy residue, a combination of baking soda and white vinegar is a must. Feel free to apply it in addition to the above technique.

What cleaning techniques should be preferred before using the candle method?

Before trying to whitewash the joints directly with a candle, they must be pre-cleaned in several ways, By degree of dirt:

For lightly soiled joints

If there are only small areas to treat, the toothbrush and toothpaste used will do the trick. However, you will have to do it differently if you plan to clean a larger area. In this case, mix baking soda with hydrogen peroxide to get a paste that applies directly to the surface. Leave it on for 5 minutes and then rinse it off with clean water.

Cleaning shower joints with an old toothbrush

Cleaning shower joints with an old toothbrush – Source: spm

For moderately soiled joints

In the case of moderately soiled joints, you can count on me The cleansing power of white vinegar and the abrasive property of sodium bicarbonate. Mix 4 tablespoons of baking soda with 10 cl of white vinegar, then soak a washing brush in the resulting solution. Scrub the plugs and rinse them long enough with clean water before drying the surface with a clean, dry cloth.

For very dirty joints

Against particularly dirty joints, you can use more powerful products like ammonia Remember to protect yourself.

First, take a pair of gloves and a mask and ventilate the house to discharge product fumes. In a bowl, dilute the ammonia in two-thirds of the water. Apply the obtained solution to the clogs with a brush before rinsing with clear water. Let it dry and you’re done.

Following this method of cleaning and maintaining joints will save you from wasting precious hours trying to clean and whiten them at any cost.

About the author

hana

Leave a Comment