recipes

Put a water bottle in the toilet tank: the genius trick to save a lot of money

Written by hana

Who would have believed that? A simple plastic bottle can reduce your monthly water consumption. If you are still looking for a water-saving solution, try this trick that will help you reduce the flow of water in your toilet.

So how can you reduce your water consumption by using a simple bottle in the toilet?

There is a simple and economical way to reduce your water consumption. Simply take a used water bottle and do the following. This will allow you to save a large amount of water on a daily basis.

  • Put a water bottle in the toilet tank

Water bottle in the toilet

Water bottle in toilets – Source: spm

The principle is simple. Simply open the toilet tank and place a bottle full of water, then close it. However, while doing this task, be careful not to obstruct the rinsing mechanism of the bottle. This will reduce the volume of water in the tank. In fact, with a bottle inside the tank, the rinse will not be able to hold the same amount of water, which reduces your consumption by 1.5 liters of water each time you use it.

Warning: It is not recommended to put a brick in the place of the bottle. Over time, brick particles can clog drains.

Other tips for saving toilet water

Besides the water bottle trick, there are other solutions to lower your monthly water consumption. It starts with simple procedures to apply at home.

  • Check that there is no water leakage in the toilet

toilet repair

Toilet repair – Source: spm

It is not uncommon to see a sudden increase in your water consumption. This may be due to water leakage in the toilet. So, before thinking about saving water, try to identify the source of the problem. To check that the toilet is not leaking water, pour food coloring into the tank and note the result. If the color of the walls changes within a few minutes, this means that repairs are expected.

  • Adjust the position of the float inside the toilet tank

Now that the problem is solved, you can save water with this simple trick. Open the toilet tank and change the position of the float. In fact, by placing it low, you will be able to reduce the level of water used in the tank. This way, you can make some extra savings on your water bill.

  • Use shower water in the toilet

bucket in the bathroom

bucket in the bathroom. Source: spm

We often wait a few seconds before taking a shower. The reason is known: you have to wait for the water to heat up! In the meantime, you can collect running water to avoid any waste. Put a bucket under the shower and let it fill up. Once the water starts to heat up, take out the bucket and set it aside. Later, this water can be poured into the toilet bowl. It is possible to fill the tank directly with this water, a gesture that can nevertheless be tedious!

  • Choose a dual flush control system for your toilet

The operation of the dual control flow is simple. The large button allows you to flush with a large flow of water while the small button allows you to drain less water. This system is increasingly widespread and saves 3 to 6 liters of water every time the toilet is flushed. Here’s a good reason to change toilets!

As you understand, reducing your water consumption starts with adopting simple, easy and economical measures on a daily basis. Test the water bottle trick without further delay and you will succeed in lowering your water bill this month!

About the author

hana

Leave a Comment